- 您现在的位置：买卖IC网 > Sheet目录241 > PESD5V0V1BLD,315 (NXP Semiconductors)DIODE ESD PROTECTION SOD-882
NXP Semiconductors
PESD5V0V1BLD
Very low capacitance bidirectional ESD protection diode
7. Application information
The PESD5V0V1BLD is designed for the protection of one bidirectional data or signal line
from the damage caused by ESD and surge pulses. The device may be used on lines
where the signal polarities are both, positive or negative with respect to ground.
The PESD5V0V1BLD provides a surge capability of 45 W per line for an 8/20 μ s
waveform.
line to be protected
PESD5V0V1Bx
GND
006aab610
Fig 10. Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.
2. The path length between the device and the protected line should be minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors , and is
suitable for use in automotive applications.
PESD5V0V1BLD
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 7 December 2010
? NXP B.V. 2010. All rights reserved.
8 of 14
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
PESD5V0V1BSF,315
DIODE BIDIR ESD PROT SOD962
PESD5V0X1BL,315
DIODE ESD PROT BI-DIR 5V SOD-882
PESD5V0X1BQ,115
DIODE ESD PROT BI-DIR 5V SOT-663
PESD5V0X1UAB,115
DIODE ESD PROT UNIDIR 5V SOD523
PESD5V0X1UALD,315
DIODE ESD PROT UNIDIR 5V SOD882
PESD5V0X1UB,135
DIODE ESD ULT LOW CAP UNI SOD523
PESD5V0X1ULD,315
DIODE ESD PROT UNIDIR 5V SOD882
PESD5V2S18U,118
ARRAY ESD PROTECTION 20SSOP
相关代理商/技术参数
PESD5V0V1BSF
制造商:NXP Semiconductors 功能描述:DIODE ESD 5V BIIDIR 3.5PF SOD962 制造商:NXP Semiconductors 功能描述:DIODE, ESD, 5V, BIIDIR, 3.5PF, SOD962
PESD5V0V1BSF,315
功能描述:ESD 抑制器 BIDIRECTIONAL CAPACITANCE ESD RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C
PESD5V0V1BSF_11
制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Ultra low profile bidirectional very low capacitance ESD protection diode
PESD5V0V1USF,315
功能描述:DIODE ESD PROTECTION SOD962 RoHS:是 类别:未定义的类别 >> 其它 系列:* 标准包装:1 系列:* 其它名称:MS305720A
PESD5V0V1USF315
制造商:Rochester Electronics LLC 功能描述: 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述:
PESD5V0V2BMBYL
功能描述:TVS DIODE 5VWM 12.5VC XQFN3 制造商:nexperia usa inc. 系列:汽车级，AEC-Q101 包装:剪切带（CT） 零件状态:在售 类型:齐纳 双向通道:2 电压 - 反向关态（典型值）:5V（最大） 电压 - 击穿（最小值）:5.5V 电压 - 箝位（最大值）@ Ipp:12.5V 电流 - 峰值脉冲（10/1000μs）:9A（8/20μs） 功率 - 峰值脉冲:- 电源线路保护:无 应用:汽车级 不同频率时的电容:18pF @ 1MHz 工作温度:-55°C ~ 150°C（TA） 安装类型:表面贴装 封装/外壳:3-XFDFN 供应商器件封装:DFN1006B-3 标准包装:1
PESD5V0V2BMYL
功能描述:TVS DIODE 5VWM 12.5VC XQFN3 制造商:nexperia usa inc. 系列:汽车级，AEC-Q101 包装:剪切带（CT） 零件状态:在售 类型:齐纳 双向通道:2 电压 - 反向关态（典型值）:5V（最大） 电压 - 击穿（最小值）:5.5V 电压 - 箝位（最大值）@ Ipp:12.5V 电流 - 峰值脉冲（10/1000μs）:9A（8/20μs） 功率 - 峰值脉冲:- 电源线路保护:无 应用:汽车级 不同频率时的电容:18pF @ 1MHz 工作温度:-55°C ~ 150°C（TA） 安装类型:表面贴装 封装/外壳:SC-101，SOT-883 供应商器件封装:DFN1006-3 标准包装:1
PESD5V0V4UF
制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Very low capacitance unidirectional quadruple ESD protection diode arrays